| Specification | Details |
|---|
| Brand | Teltonika |
| Model | DAP145 |
| Product Type | RS485 Industrial Wireless Access Point |
| Wireless Standard | IEEE 802.11b/g/n (Wi-Fi 4) |
| Wireless Modes | Access Point (AP), Station (STA) |
| Wi-Fi Users | Up to 50 simultaneous connections |
| Wi-Fi Security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK |
| Encryption | AES-CCMP, TKIP, Auto Cipher |
| SSID Features | SSID stealth mode, MAC address-based access control |
| Wireless Features | Mesh (802.11s), Fast Roaming (802.11r), Relayd, BSS Transition Management (802.11v), Radio Resource Measurement (802.11k) |
| Wireless MAC Filter | Allowlist, Blocklist |
| Ethernet Interfaces | 2 × RJ45 LAN ports |
| Ethernet Speed | 10/100 Mbps |
| Ethernet Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3az |
| Auto MDI/MDIX | Supported |
| RS485 Interface | 1 × 6-pin terminal block |
| RS485 Wiring | 2-wire or 4-wire interface |
| RS485 Connections | D+, D-, R+, R- |
| Serial Functions | Console, Serial over IP, Modem, MODBUS Gateway |
| Routing | Static, Dynamic and Policy-Based Routing |
| Dynamic Routing Protocols | BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP |
| Network Protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, WOL |
| VPN Support | OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc, EoIP |
| Firewall | Port Forwarding, Traffic Rules, Custom Rules, TTL Target Customisation, DMZ, NAT, NAT-T, NAT64 |
| Security Features | DDoS Prevention, Port Scan Prevention, VLAN, Web Filter, Access Control, Certificate Manager, 802.1x |
| Authentication | Pre-shared Key, Digital Certificates, X.509, TACACS+, Internal and External RADIUS |
| Network Features | DHCP, QoS/SQM, DDNS, DNS over HTTPS, Network Failover, Load Balancing, Hotspot, IGMP Proxy |
| Network Management | Web UI, FOTA, SSH, SNMP, MQTT, JSON-RPC, TR-069, RMS |
| IoT Protocols | BACnet, OPC UA, MODBUS, DNP3, DLMS/COSEM |
| IoT Platforms | ThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core |
| Data to Server | HTTP(S), MQTT, Azure MQTT |
| CPU | MediaTek 580 MHz, MIPS 24KEc |
| RAM | 128 MB DDR2 |
| Flash Storage | 16 MB Serial NOR Flash |
| Operating System | RutOS (OpenWrt-based Linux OS) |
| Power Connector | 3-pin pluggable terminal block |
| Input Voltage | 9–30 VDC |
| Power Protection | Reverse Polarity Protection, Surge Protection |
| PoE Support | Passive PoE through LAN1, Mode B |
| PoE Compatibility | Not compatible with IEEE 802.3af/at/bt |
| Power Consumption | Idle: Less than 1 W; Maximum: Less than 2 W |
| Antenna Connector | 1 × RP-SMA for Wi-Fi |
| Status LEDs | 2 × LAN LEDs, 1 × Power LED |
| Reset | Reboot, User Default Reset, Factory Reset |
| Other Interfaces | 1 × Grounding Screw |
| Casing Material | Anodised Aluminium Housing and Panels |
| Dimensions (W × H × D) | 11.31 × 2.5 × 6.86 cm |
| Weight | 0.1492 kg |
| Mounting | Integrated DIN Rail Bracket; Wall Mount and Flat Surface (Additional Kit Required) |
| Operating Temperature | -40°C to +75°C |
| Operating Humidity | 10%–90% Non-Condensing |
| Ingress Protection | IP30 |