Lysora LS2P-8MG2XS-P 8-Port 2.5G Layer 2+ Managed PoE Switch with 2× 10GE SFP+ Ports and 240W PoE Budget

The Lysora LS2P-8MG2XS-P 8-Port 2.5G Layer 2+ Managed PoE Switch provides 8 × 10/100/1000/2500BASE-T RJ45 ports, 2 × 10GE SFP+ ports, and 8 PoE/PoE+ output ports with a 240W PoE budget. Lysora LS2P-8MG2XS-P it provides an 80 Gbps switching capacity, 59.52 Mpps forwarding rate, 12 Mbit buffer, 512 MB RAM, and 256 MB flash memory.

The LS2P-8MG2XS-P supports Layer 2 features including port-based VLAN, IEEE 802.1Q VLAN, Voice VLAN, STP/RSTP/MSTP, LLDP/LLDP-MED, static MAC addresses, MAC address filtering, static aggregation, and LACP. Lysora LS2P-8MG2XS-P it supports up to 4094 VLANs and 16,000 MAC address entries, with interface flow control and inbound or outbound rate limiting based on interface traffic.

The switch also supports Layer 2+ IP networking functions including IPv4 and IPv6 static routing, with up to 64 IPv4 static routes, 64 IPv6 static routes, an IPv4 routing table size of 512 network routes, an IPv6 routing table size of 128 network routes, and an IPv4 routing table size of 6000 host routes. Lysora LS2P-8MG2XS-P it also supports ARP, IPv4 ping, IPv4 traceroute, ICMPv6, IPv6 ping, IPv6 traceroute, DNS client, DNSv6 client, and DHCP client.

For multicast traffic, the switch supports IGMPv1 snooping, IGMPv2 snooping, basic IGMPv3 snooping, full IGMPv3 snooping, and IGMP filtering. Lysora LS2P-8MG2XS-P it supports standard and extended ACLs, 802.1p and DSCP priority-based traffic classification, egress queues, queue scheduling, and traffic rate limiting.

Security features include 802.1X authentication, MAC address-based and port-based 802.1X authentication, RADIUS, port isolation, broadcast storm control, multicast storm control, unknown unicast storm control, DHCP snooping, IP-MAC-port binding, ARP anti-spoofing, IP source guard, and CPU protection policy.

For management and monitoring, the switch supports web management, cloud management, app management, mirroring, Self-Organizing Network, HTTPS login, Syslog, SNMPv1/v2c/v3, NTP client, and camera detection. Lysora LS2P-8MG2XS-P it also supports cloud-based auto-recovery, ERPS, loop prevention, PoE watchdog, PoE service failure detection, PoE power overload protection, local upgrade, online upgrade, EEE, cable testing, and jumbo frames up to 9216 bytes.

The LS2P-8MG2XS-P features a metal enclosure, rack/desk mounting, and two fixed fans with air cooling and left-to-right airflow. Lysora LS2P-8MG2XS-P it operates from 0°C to +50°C, supports 10% RH to 90% RH non-condensing operating humidity, and has an MTBF of 400,000 hours. The specified operating and storage altitude is −500 m to +5,000 m.

Key Features

• 240W PoE Budget — Provides a 240W PoE budget with 8 PoE/PoE+ output ports.
• 2.5G Gigabit — Includes 8 × 10/100/1000/2500BASE-T RJ45 ports.
• 10GE SFP+ — Provides 2 × 10GE SFP+ ports for high-speed optical connectivity.
• 80Gbps Switching — Provides 80 Gbps switching capacity and 59.52 Mpps forwarding rate.
• Layer 2+ Routing — Supports IPv4 and IPv6 static routing with specified routing table capacities.
• Advanced Security — Supports 802.1X, RADIUS, DHCP snooping, IP source guard, and ARP anti-spoofing.

Best Suited For

• Layer 2+ networks requiring 2.5G RJ45 connectivity
• Deployments requiring 10GE SFP+ uplink connectivity
• Networks requiring 8 PoE/PoE+ output ports within the 240W PoE budget
• Installations requiring IPv4 and IPv6 static routing
• Networks requiring VLAN, STP/RSTP/MSTP, LACP, ACL, and QoS features
• Deployments requiring web, cloud, or app management

Not Suited For

• Applications requiring OSPFv2 or OSPFv3, as both are specified as not supported
• Networks requiring a PoE budget above 240W
• Deployments requiring more than 8 PoE/PoE+ output ports
• Installations requiring fanless operation, as the switch uses two fixed fans
• Environments operating outside the specified 0°C to +50°C operating temperature range
• Applications requiring 10GE connectivity through copper RJ45 ports, as the datasheet specifies 10GE SFP+ ports, not 10GBASE-T RJ45 ports