Hi-Focus HF-SGGW08-DS120W 8-Port Gigabit PoE+ Switch – 8× 10/100/1000Mbps PoE RJ45, 2× Gigabit RJ45 Uplink, 120W PoE Budget, 30W/Port, AI Watchdog, VLAN, 300m Extend Mode, Dual Power Supply, 1-Year Warranty

The Hi-Focus HF-SGGW08-DS120W 8-Port Gigabit PoE+ Switch provides network connectivity through 8 × 10/100/1000Mbps PoE ports (Ports 1–8) and 2 × 10/100/1000Mbps RJ45 uplink ports (Ports 9–10). This configuration provides eight PoE ports along with two additional Gigabit RJ45 uplink ports.

The switch supports IEEE 802.3, IEEE 802.3i, IEEE 802.3u, and IEEE 802.3x network standards. It provides 5.6 Gbps switching capacity, a 4.1664 Mpps forwarding rate, and a 4K MAC address table. Hi-Focus HF-SGGW08-DS120W 8-Port the switch uses store-and-forward technology for network traffic processing and supports 10/100/1000Base-T(X) automatic detection, full/half duplex, and MDI/MDI-X adaptation.

For PoE applications, Hi-Focus HF-SGGW08-DS120W 8-Port the switch provides a 120 W total PoE power budget. Ports 1–8 support PoE with a maximum power of 30W per port and a standard power of 15.4W per port. The PoE power pin configuration is 1/2 (+), 3/6 (-).

The switch supports AI PoE Watchdog, VLAN isolation, and 300m Extend mode through its DIP switch. It also provides 6KV surge protection, dual power supply, and IP30 protection. It operates from -20°C to +55°C and supports 5%–90% RH non-condensing working humidity. Hi-Focus HF-SGGW08-DS120W 8-Port its dimensions are 44 × 29 × 4.45 cm.

Key Features

• 8 × 10/100/1000Mbps PoE ports with 2 × 10/100/1000Mbps RJ45 uplink ports
• 120W total PoE power, with up to 30W per port
• 5.6 Gbps switching capacity, 4.1664 Mpps forwarding rate, and 4K MAC address table
• AI PoE Watchdog, VLAN isolation, and 300m Extend mode with up to 10Mbps transmission in Extend mode
• 6KV surge protection, dual power supply, IP30 protection, and 1-year warranty

Best Suited For

• CCTV and network surveillance installations
• IP cameras requiring PoE connectivity
• Wireless access points
• Networks requiring multiple Gigabit PoE ports
• Installations requiring up to 120W total PoE power
• Deployments requiring AI PoE Watchdog or 300m transmission mode

Not Suited For

• Applications requiring more than 120W total PoE power
• Individual devices requiring more than 30W per PoE port
• Networks requiring more than 8 PoE ports
• Applications requiring SFP or fiber-optic ports
• Extend-mode applications requiring speeds above 10Mbps over the specified extended distance